Coat Hangers

Coat Hanger Receptacles make it possible to use ball-top coat hangers, so your nice coat hangers stay where they belong.  Receptacles can be attached to most coat rods. Each receptacle is designed for a specific situation.   Model A...

Camden-Boone's 112-001 polymer coat hanger measures 3/4 of an inch wide so no one can complain of "hanger shoulders" on their jackets. It includes a non-slip trouser bar. Available with your choice of standard open hook or the anti-theft ball-top option...

The 112-002 from Camden-Boone is a dark brown polymer coat hanger that measures 3/4 of an inch wide so no one can complain of "hanger shoulders" on their jackets. It includes a non-slip trouser bar.  This model uses an open hook to hang over the...

The Camden-Boone coat hanger 114-001 is a modern anti-theft ball-top design available in three furniture-grade wood finishes: Light Oak, Medium Oak, and Walnut.  Hanger receptacles are an option above and are not included in the price.  For an...

The Camden-Boone coat hanger 114-002 is a modern design available in three furniture-grade finishes: Light Oak, Medium Oak, and Walnut.  These are available as either this open hook version or as an anti-theft ball-top version, the 114-001. This...

Camden-Boone's 115-001 is a 3/4" wide varnished hardwood coat hanger with a trouser bar.  It uses an anti-theft ball-top shank for use with hanger receptacles.  If you're tired of your nice hangers going home with other people, here's a good...

Camden-Boone's 115-002 is a basic 3/4" wide varnished hardwood coat hanger with a trouser bar.  It uses an open hook for hanging on standard anger rods.  It's plain, it's simple, and it may be exactly what you need for your best clothes. Of...

Camden-Boone's 115-003 is a 3/4" wide varnished hardwood coat hanger with a trouser bar.  It uses a closed loop shank to create a permanent attachment to coat hanger rods.  Note that you have to be able to remove the coat rod in order to...

Camden-Boone's 116-001 is a 3/4" wide varnished hardwood coat hanger with skirt clips.  It features an anti-theft ball-top shank for use with hanger receptacles.  If you're tired of your very nice hangers going home with other people, here's...

Camden-Boone's 116-002 is a 3/4" wide varnished hardwood coat hanger with an open hook for use with standard hanger rods. Instead of a trouser bar, it provides skirt clips. Your best clothes will appreciate it. It may be you'd prefer those skirt clips...

Camden-Boone's extra heavy duty coat hanger 117-001 is an anti-theft ball-top design made of chrome plated 3/16" steel.  The ball-top design helps people remember that your nice coat hanger is not their new coat hanger. These hangers are designed...

Camden-Boone's extra heavy duty coat hanger 117-002 is made of chrome plated 3/16" (4.75 millimeters) steel. Think about that for a second. When was the last time you accidentally bent nearly a quarter-inch of steel?  These coat hangers are...

You want your heavy duty coat hangers to stay where they belong.  Camden-Boone's extra heavy duty coat hanger 117-003 has an anti-theft closed loop hanger and is made of chrome plated 3/16" steel. The closed loop design keeps your coat hanger from...

This is the Glaro 1600SA heavy-duty coat hanger in Satin Aluminum.  Have no worries that these coat hangers will bend or break from anything that would normally be placed on a coat hanger. Although made of lightweight aluminum, the thickness of the...

Magnuson's Basic coat hanger is a unique open hook design made with Beech veneer with a chrome hook. The rounded corners and 11-/16" depth make sure that you don't get "hanger shoulders". Dimensions: 17-5/8" W x 9-3/4" H x 11/16" D Hanger...

Magnuson's GRIP coat hanger is a unique open hood design made with Beech that is coated with black rubber and a black galvanized steel hook. The rubber coating insures that jackets and dress straps stay put. Rounded corners and 11-/16 of an inch depth...

Magnuson's MG17P coat hanger is a slotted anti-theft design, designed for use with wire grids.  It is molded polystyrene and is available in your choice of Black or Charcoal Grey. 8-7/8" H x 17" W x 3/4" D Material: Polystyrene

Magnuson's MG-17PM coat hanger is a slotted anti-theft design, designed for use with wire grids.  It is molded polystyrene and is available in your choice of Black or Charcoal Grey.  8-7/8" H x 17" W x 3/4" D Material: Polystyrene

The Magnuson Tubulus-H10 Coat Peg is crafted of Brushed Steel with the front of the peg in Polished Stainless finish, matched with a coat hanger, crafted of varnished beech and a brushed stainless steel hanger hook. This unit is also available with...

The Filo-A from Magnuson is an epoxy coated wire coat hanger with an anti-theft closed loop.  It is also available with a standard open hook as the Filo-S. Finished in White, Black, Silver or Sand. 9-7/16” H x 17-5/16” W x...

The Filo-S from Magnuson is an epoxy coated wire coat hanger with a standard open hook.  It is also available with an anti-theft closed loop as the Filo-A. Finished in White, Black, Silver or Sand. 9-7/16” H x 17-5/16” W x...

Magnuson's MG-17PM coat hanger is a slotted anti-theft design, designed for use with grids.  This is the 100 Pack, but these units are also available in packages of 6 or 24. Most anti-theft coat hanger designs require permanent attachment of some...

Open hook polystyrene coat hanger. This item comes in a pack of 100 and is also available in packs of 6 and packs of 24. 9" H x 17" W x 3/4" D

Open hook polystyrene coat hanger. This item comes in a pack of 24, and is also available in packs of 6 and packs of 100. 9" H x 17" W x 3/4" D

Open hook polystyrene coat hanger. This item comes in a pack of 6, and is also available in packs of 24 and packs of 100. 9" H x 17" W x 3/4" D

Molded polystyrene coat hanger with mini-hook. This item comes in a pack of 100, and is also available in a 6 pack and 24 pack. 7-7/8" H x 17" W x 3/4" D

Molded polystyrene coat hook with mini-hook. This item comes in a pack of 24, and is also available in a 6 pack and 100 pack. 7-7/8" H x 17" W x 3/4" D

Molded polystyrene coat hook with mini-hook. This item comes in a pack of 6, and is also available in a 24 pack and 100 pack. 7-7/8" H x 17" W x 3/4" D

Molded polystyrene coat hanger with T-top for use with the R1.5 Receptacle. Available in Black or Charcoal Grey. This item comes in a pack of 100, and is also available in a 24 pack. 9-3/4" H x 17" W x 3/4" D

Molded polystyrene coat hanger with T-top for use with the R1.5 Receptacle. Available in Black or Charcoal Grey. This item comes in a pack of 24 and is also available a 100 pack. 9-3/4" H x 17" W x 3/4" D

Molded polystyrene coat hanger with T-top for use with the SR34 Receptacle. Available in Black or Charcoal Grey. This item comes in a pack of 100 and is also available in a 24 pack. Please note the SR34 Receptacles are sold separately. 9-3/4" H...

Molded polystyrene coat hanger with T-top for use with the SR34 Receptacle. Available in Black or Charcoal Grey. This item comes in a pack of 24, and is also available in a 100 pack. Please note the SR34 Receptacles are sold separately...

Pack of 50 Closed Loop Steel Wire coat hangers finished in Silver powder coat. 7-5/8" H x 17" W x 1/8" D

Pack of 50 Steel wire coat hangers finished in Silver powder coat. 7-5/8" H x 17" W x 1/8" D

The 2161-AL Coat Hanger from Peter Pepper was designed for use with the 2145 Coat Rack.  The unique shape of the 2161's open hook is meant for the coat rod of the 2145.  It causes the hanger to remain aligned on the rack. Dimensions:...

The 2166-AL Coat Hanger from Peter Pepper was designed for use with the 2165 Coat Rack which comes standard with six of these non-removable anti-theft hangers.  Of course, some people prefer to have a few more than six hangers.  We usually...